top of page

TakkTile Sensors

TakkTile Sensors / Products / TakkTile Starter Kit
tactile sensors

TakkTile Starter Kit



The TakkTile Starter Kit contains everything you need to get started with TakkTile.


The kit includes one TakkStrip and one TakkStrip 2 each cast in rubber, and therefore do not require additional molding. The communication with the TakkStrips is provided through a dedicated Arduino device. The device uses a virtual serial port which is supported widely on Windows, Mac, and Linux. The sensor readings can be displayed in a serial terminal, or processed through a Python API, or even MATLAB.

Ships within one week.

OUT OF STOCK - TakkTile Starter Kit

Each TakkTile Starter Kit contains:




Please note: import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to buying.




We take pride in producing useful technology; since this is research hardware, the purchaser is responsible to test its suitability and reliability for a given application. In legalese, it is provided “as is” and RightHand Robotics, Inc. disclaims any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. But, if you are dissatisfied with it, please let us know and we will try to help. Defective products may be returned for a full, timely refund of the original purchase price.

tactile sensors
tactile sensors
tactile sensors
Five sensors cast independently, plus a "traffic cop" microcontroller that allows access to all five over I2C.
TakkStrip 2
Six sensors; three cast independently and three cast as an array. Plus a "traffic cop" microcontroller that allows access to all six over I2C.
A high-speed USB interface for TakkStrips that speaks to Linux — ROS-compatible!
robotiq gripper sensors
tactile sensors
One TakkStrip and one TakkStrip 2 cast in rubber, an interface arduino, and wires — everything you need to get started.​
Tactile sensors that were designed for the fingertips of the Robotiq Adaptive Gripper.​
To access:
  • Sensor design plans
  • Tutorials to enable I2C communication
  • Tutorials for using visualization tools
  • Tutorials for integration with ROS, Raspbery Pi, etc.
  • etc.
Plans & Tutorials
bottom of page